VLS 3.60DT

Uniquely Universal Features

Laser Interface+™
Universal Laser Systems has developed the world’s most advanced, powerful and fexible laser print driver.

1-Touch Laser Photo™
We developed this software to make any photographic image suitable for laser engraving.

Universal Laser Cartridges
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications.

High Power Density Focusing Optics™
These optics allow the laser beam to be focused to a much smaller spot, producing sharper images at tighter tolerances.

Rapid Reconguration™ of Lasers
Every laser cartridge we produce is factory pre-aligned for easy integration into any of our laser platforms.

System Features

Laser Features

Platform Specifications

VLS 3.60DT
Laser Material Processing Area (W x H)24 x 12 in (610 x 305 mm)
Maximum Part Size (W x H x D)26.75 x 14.6 x 4 in (679 x 370 x 102 mm)
Overall Dimension (W x H x D)34 x 14 x 25 in (864 x 356 x 635 mm)
Rotary CapacityMax Diameter: 4.0 in (102 mm)
Min Diameter: 1.0 in (25.4 mm)
Motorized Z Axis Lifting Capacity20 lbs (9 kg)
Available Focus Lenses2.0 in (50 mm)
HPDFO™ (High Power Density Focusing Optics)
Laser Platform Interface PanelFive button keypad
Computer RequirementsRequires dedicated PC with Windows® 7/8/10 32/64 bit and one available USB port (2.0 or higher)
Optics ProtectionIntegrated with included gas assist
Cabinet StyleDesktop
Laser Options10, 30, 40, 50 and 60 Watts
Weight95 lbs (43 kg)
Power Requirements110V/10A
220V-240V/5A
Exhaust RequirementsOne 3 in (76 mm) port
250 CFM @ 6 in static pressure (425 m3/hr at 1.5 kPa)
MaterialEngraveCut
ABS Plastic
Acrylic
Avonite
Brick 
Cardboard
Ceramic 
Chipboard
Corian® 
Cork
Delrin®
Fabric
Fiberglass 
Foam
Fountainhead
Glass 
Granite 
Kevlar
Laminated
Plastics
Leather 
Marble 
Masonite®
Mat Board  
MaterialEngraveCut
Melamine
Mother of Pearl
MDF
Mylar®
Nylon
Paper
Particle Board 
Polycarbonate
Polypropylene
Polyester
Pressboard
Resin
Rubber
Silicone
Silk 
Stone 
Styrene 
Tile 
Travertine
Twill
Wood  
GUIDELINE: 10 WATTS CAN CUT APPROXIMATELY 1/8”; 25 WATTS CAN CUT APPROXIMATELY 1/4”; 50 WATTS CAN CUT APPROXIMATELY 1/2”; 100 WATTS CAN CUT APPROXIMATELY 3/4”.
MaterialDirect1MMC2
Alum-A-Mark 
Aluminum 
Anodized 
Aluminum 
Brass
Carbide 
Cobalt 
Copper
Iron  
MaterialDirect1MMC2
Nickel 
Painted 
Brass
Pewter
Stainless
Steel
Steel 
Titanium  
Tungsten  

Air Dryer

Removes moisture from air assist which can damage laser optics. Allows air assist to operate even in humid environments. Suggested for use with the Compressed Air Unit.

Computer-Controlled Compressed Air Unit

Supplies dry, oil-free compressed air to enable air assisted cutting and engraving and extends the life of the laser system optics. The compressed air unit is controlled through the Versa Laser and turns on automatically when a job is in process. The compressor pump is noise-insulated for quiet operation.
Router Samples

Rotary Fixture Attachment

The rotary attachment accommodates most cylindrical items up to 5 inches in diameter and can be installed or removed without the need to restart the system. Holds part on both ends and can be run in high speed raster mode with lighter objects and also runs in vector mode. Rotates beyond 360 degrees in order to assure full wrap-around engraving. Loading and unloading is quick and easy. A sensor detects the rotary attachment when installed and automatically makes all of the adjustments necessary for rotary marking and engraving.
Router Samples

Air Assist Back Sweep

Recommended for use with the Computer-Controlled Compressed Air Unit, the Back Sweep attachment directs high pressure air or inert gas toward the exhaust duct to suppress flaming and evacuate smoke, fumes and debris away from the material being processed. This is particularly useful for jobs that require deep cutting and for rubber or other materials that produce a lot of dust and debris during the engraving process.
Router Samples

Integrated Cart

Moveable floor standing unit combines stylish good looks with durable construction for years of dependable service. Two large drawers provide generous storage; caster wheels offer moving convenience.

High Power Density Focusing Optics (HPDFO)™

Exclusive, patented optics increase the power density of the laser to achieve dramatically improved resolution for applications requiring extremely fine details. HPDFO makes it possible to engrave smaller text, produce higher resolution graphics and allows direct marking on some uncoated metals, including iron, stainless steel, chrome steel and titanium, without the need for metal marking compounds.
Router Samples

Downdraft Honeycomb Cutting Table

Provides a low contact area cutting surface with minimal back reflection and light vacuum hold-down. Removes smoke from below cut, reducing potential of damage to bottom surface of material and improves cutting quality. A sensor detects the presence of cutting table when it’s installed and automatically adjusts the Z-axis to place materials at the proper focus. Greatly reduces need to clean work table.
Fiber metal cutting sample

Air Assist Cone

The Air Assist Cone directs a jet of compressed air onto the material being processed to suppress flaming, thus improving cutting and engraving quality. Suggested for use with the Computer-Controlled Compressed Air Unit.
Fiber metal cutting sample

Computer Controlled Air Cleaner/Cart

Air filtration device removes smoke and fumes from VersaLaser when external venting is not possible. Cart is controlled through the VersaLaser and automatically powers on/off when a job is in process. Moveable floor standing unit offers the same sleek design and durable construction as the Integrated Cart minus the storage.
Fiber metal cutting sample

Photo Gallery

Enquiry form